What's in the Box:
- 1 x Main Pedals Assembly
- 2 x Foot Platforms
- 2 x Soft Center Cam
- 2 x Hard Center Cam (Preinstalled)
- 1 x Standard Spring (Preinstalled)
- 1 x Heavy Spring
Installing Foot Platforms
1. Disassemble both foot platforms by removing the highlighted screws and nuts to free the pads.
2. Remove the highlighted screws.
3. Install the foot plates using the same screws as highlighted below.
4. Reassemble the foot platforms.
5. The length of the foot plates can be increased or decreased by removing the highlighted screws and repositioning the plate.