What's in the Box:
- 2 x Screw DIN 965 M3x10 A2
- 2 x Nut DIN 985 M3 A2
- 4 x Screw DIN 912 M5x12 A2
- 4 x Nut DIN 934 M5 A2
VPC Desk Mount Adapter - TMW Throttle installation
- 8 mm Wrench (NOT INCLUDED)
- 10 mm Wrench (NOT INCLUDED)
- H3 Hex Key (NOT INCLUDED)
- H5 Hex Key (NOT INCLUDED)
1. Unscrew the highlighted bolts on your Desk Mount and set the adapter to the desired height.
2. Fix the adapter into place with the same bolts and nuts.
3. Set a TMW pad on the adapter.
4. Fix the pad with the screws M3x10 and nuts M3.
5. Using the