What's in the Box:
- 1 x Bracket
- 1 x Bracket Plate
- 4 x Bolt M5x12
- 4 x Nut M5
Installing on VPC Desk Mount V4
1. Attach the bracket to the plate using the M5x12 bolts and nuts.
2. Place the adapter in the VPC Desk Mount to your desired height and secure.
3. Unscrew the highlighted screws. The outer screws must be removed completely and the innermost screws can be loosened by 3-4 mm.
4. Slide the MT-50CM3 Base onto the adapter, ensuring that the plate slots underneath the loosened screws. Tighten all 4 screws to the plate.
Please visit the VIRPIL Controls support portal for troubleshooting advice. If you are still experiencing issues or unable to find answers to your specific question, please create a ticket on our support portal!