VPC Software Setup Version: [20230328]

Modified on Wed, 29 Mar, 2023 at 1:03 PM

VPC Software Setup Version 20230328:

1. VPC Configuration tool

  • New profile for "VPC WarBRD-D Base" 
  • Axes setup, modified calibration maths, makes it more accurate.
  • Axes setup, fixes for Virtual axes.
  • Buttons setup, added "Click delay timer" for "Short/Long click" and "Press and hold" customisation.
  • Buttons setup, fixes for Switch/Toggle/Soft.toggle modes.
  • LED's, fixes for Bases with ALPHA Prime and Controls panels connected via OUT/AUX.
  • USB Profile setup, added new feature "Low voltage control". if it enabled firmware will control power level from USB <4.5v, with low level once detected all LED's will set into RED color (this fuction can helps to detect too long lines or poor USB power quality).


2. VPC Joystick Tester

  • Added secodary axes for "AIM" visualisation (it is easy to check main X/Y joystick axes and ministick secondary Rx/Ry axes)
  • Optimized CPU usage


3. VPC Shift tool

  • new internal USB-feature report interface, no more collisions with Link-tool/LED control tool.


4. VPC LED Control tool

  • new command '55' - set one color to ALL LEDs
  • new command '56' - set one color to ALL GRIPS LEDs (grips with one color indication)
  • new command '57' - set one color to ALL ON-BOARD LEDs (this is for throttles and panels)
  • new command '58' - set one color to ALL SLAVE LEDs (for panels connected by OUT/AUX)
  • new command '59' - set one color to ALL EXT.GRIPS LEDs (ALPHA Prime)

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article